Pay Attention: Watch Out For How Upvc Window Replacement Hinges Is Taking Over And What To Do About It

Choosing Upvc Window Replacement Hinges

The process of selecting and fitting upvc window replacement hinges isn't as difficult as you think. It is important to check the arrow on the hinges are facing the correct way and the thickness (13mm or 17mm) of the hinge arm on the open frame.

There are a few different types of hinges to choose from, each with distinct features. This article will discuss the most common kinds of uPVC window hinges and their advantages.

Egress/Easy Clean Hinge

They are a great option for replacing or upgrading your fire escape window since they open up to a full 90 degree angle. They can be closed to an easy-clean position that allows you to see the outside of windows without the need to climb ladders or lean at dangerous angles.

These heavy-duty egress hinges are made by Yale, one of the most well-known and reliable home security brands available today. They work with all types of uPVC side-hung windows. By pressing a small button the window sash will be moved to the side, and then into the position that is easy to clean. After closing, the sash will be reset to its original position.

Both 13mm and 17mm sizes are available. Make use of our Egress Selection Guide to help you select the best product for your window.

These hinges can be fitted to conventional side-hung frames made of aluminium or uPVC. The friction screw is used to adjust the resistance. This makes it easier to open the window and reduces the possibility of a mishap during high winds. They have been tested to more than 30,000 cycles and are compliant with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.

With no buttons or catches There are no buttons or catches. Nico Egress Easy Clean Friction Hinge is easy to use and offers a practical solution to emergency egress as well as safe cleaning. Firstly, open the window to the egress (full opening) position and then press the hinge retaining clip on the inside of the bottom corner. This will release both the bottom and top catches allowing you move the sash into the easy-cleaning position. Once it is in the easy-clean position, close the window to reset the hinges to their egress position.

Fire-Escape Hinge

Fire Escape Hinges (also known as "Easy Clean") are used to replace side-opening windows to ensure fire safety. These kinds of hinges for windows are more spacious and more efficient than standard hinges to allow an expansive clear opening to escape in the case of a fire. Building regulations stipulate that this type of hinge must be installed in any space that is habitable and has a window.

They have an exclusive friction stay that opens the window to 90 degrees and also allows the sash opening to slide across when open to allow easy cleaning of the exterior side of the glass hinge without having to use ladders. The hinges have no fiddly buttons or catches, and operate with a simple, safe lever that can be accessed from the inside of the home.

The hinges, made in the UK by Cotswold, come with a child safety restriction for everyday use. This can be removed by an invisible button. You'll have peace of mind knowing that your children will not accidentally open the doors too far. They are available in 13mm or 17mm stack heights.

To order these hinges simply take a measurement of the length of your existing side hung window hinge that is fixed to the frame (see the article on measuring the length of your window hinges made of upvc). Select the proper size hinge from the options below.

Please note that this measurement is taken from the part of the hinge that attaches to the frame, not the sash. The actual length of the hinge may be shorter or longer depending on the way your windows were made in the past. Also, when choosing the width of your hinge, most windows made of upvc will have a 13mm stack height but should your old window frame have 17mm then choose the option for this. You can also opt for the 4mm packer to make up for uPVC friction hinges the difference. All hinges come in two different directions (1 left and one right). Screws are not included in the hinges. These can be bought separately if you require. Our upvc window repair screws are highly recommended. These screws are designed to increase the performance of your hinges and allow them to operate effortlessly for a longer. They have a reduced friction design and a better weather seal that is fitted with a new nylon reducer end cap.

Restricted Hinge

There are times when a window needs to open fully and this can be a challenge using hinges that are standard. These child safety hinges help to overcome this issue and offer a fantastic solution for situations where ventilation is required but access for cleaning or escape in case of fire is not possible. They work by restricting the amount that the sash can open, and allow for the to override this restriction by pressing the push of a button. They are available in 13mm or 17mm stack heights. They are suitable for both top and side hung windows.

The Nico Restricted Egress Friction Hinges combine the benefits of a standard restrictor and a pivot for fire escape to provide a simple but efficient way to meet building regulations. It is suitable for side hung and top opening uPVC windows and is available in 17mm and 13mm stack heights. It is available in two parts, with one hinge being the one that is restricted for egress, and the other being the unrestricted. This allows one to be placed at the bottom, while the other hinge is placed at the top.

These uPVC hinges are made to be used with windows that cannot be fully opened, like the bedroom of a child. The mechanism limits the amount the sash is able to open to the safety level of 100mm and re-engages when the window is closed.

As with the other types of upvc friction hinges locks (check out this site) that are available, these hinges can be used on any type of window and are suitable for difficult to reach windows above the ground, three-storey flats or windows that normally require a ladder to access them. They can be upgraded with our range security enhancements, like hinge guards and protection plates for the hinge or dog bolts, in order to achieve PAS 24 performance.

When replacing a window hinge it is essential to determine the length of the existing hinge so that you can get replacements that are comparable in size. The easiest way to do this is to look at the hinge in the gallery and determining where you want it to be placed. Top hung hinges can be restricted to both sides and side hung hinges are restricted only on one side.

Standard Hinge

A standard hinge uses metal-to-metal contacts and has no additional components to reduce friction. It comes in a variety of finishes and also comes with an NFPA-certified fire rating. To quickly determine the radius of a hinge, lay it out flat and align a quarter dime in two corners. If the dime is more snug and the corner is round by 1/4 inch; if the quarter fits better, it's rounded by 5/8 inch.

The right hinge can determine the success or failure of the appearance of your door. Achieving the same style and finish of your hinges to your patio door hinges will give it a cohesive and attractive appearance.